Damp trap, floor damper, damper generator

In order to distinguish where the dampers are placed reasonably, they are classified into different types of dampers that are installed differently on the backup generator and the system.

Floor damper: Floor damper is fixed under the machine base and upwards of 6-8 feet for each type of machine.

Machine shake with base: shock absorber with base to reduce the force when the motor drives between the coupling between the motor and the transmitter. Usually it is rubber, buffered 6 sets for two sides of the machine and one set for water tank or just the dampers in front of the water tank.

Damping the exhaust pipe: Usually, and most of this type of damper is a spring-shaped tube and is formed and formed from stainless steel, the machine has a small capacity and the thickness of the shock is different. For the exhaust pipe installed in the remote, there is almost also a damping in the device. This shock absorbers are more elastic than vibration.

The final product mentioned for the backup electrical system is the damper of the exhaust pipe when suspended or attached to a device, in order to eliminate or prevent vibration that breaks the structure of the concrete floor.

Please call us for full consultation and design for backup power system.